Low-slope & flat roofing
Flat roofs that drain, seal and hold up to Michigan winters
Low-slope and flat roofs need a continuous membrane, not shingles. We replace flat roofs on commercial buildings, multi-family properties, porches, additions and modern homes with Versico and GenFlex TPO and EPDM systems, modified bitumen from CertainTeed, Mule-Hide and Liberty, and Gaco silicone roof coatings. We design the insulation and drainage so water leaves the roof.
- Tear-off, deck inspection and repair before anything new goes down
- Tapered insulation to move water to drains and scuppers
- Seams, edges, curbs and penetrations detailed to the manufacturer’s instructions
Brands we install





Membrane systems we install
TPO Roofing
White, reflective single-ply membrane with heat-welded seams. A common choice for commercial flat roofs. We install Versico and GenFlex TPO.
EPDM Roofing
Durable rubber membrane with a long track record on flat roofs. Flexible in cold weather. We install Versico and GenFlex EPDM.
TPO vs EPDM at a glance
| TPO | EPDM | |
|---|---|---|
| What it is | Thermoplastic single-ply membrane | Synthetic rubber single-ply membrane |
| Color | Usually white (reflective) | Usually black; white available |
| Seams | Hot-air welded | Seam tape and primer |
| Common thicknesses | 45, 60, 80 mil | 45, 60, 90 mil |
| Strengths | Reflective surface, welded seams | Long track record, flexible in cold weather |
| Typical uses | Commercial roofs, flat additions, buildings with rooftop equipment | Commercial and residential flat roofs, porches, garages |
Both are good systems. The right choice depends on the building, the existing roof, rooftop traffic, and budget. We’ll explain why we recommend one over the other on your roof.
Modified bitumen and rolled roofing
Not every low-slope roof needs a single-ply membrane. For porches, small additions, garages and low-slope sections that tie into a shingle roof, we also install modified bitumen and rolled roofing from CertainTeed and Mule-Hide, plus Liberty self-adhered modified bitumen. Modified bitumen goes down in layers, with a granule-surfaced cap sheet that stands up to foot traffic and sun.
We’ll tell you on the quote which system fits your roof and why.
Drainage comes first
The most common flat-roof failure isn’t the membrane. It’s water that sits. Ponding water that stays more than about 48 hours after rain stresses seams, collects debris and finds every weak spot.
On a replacement we look at:
- Slope to drain. Tapered insulation panels build in a slope toward drains, scuppers or gutters.
- Drains and scuppers. Size, location and condition, including clogged or undersized outlets.
- Crickets behind rooftop units and chimneys, so water doesn’t dam up behind them.
- Edges and gutters, so water leaves the roof without running down the wall.
Insulation and Michigan’s energy code
When a low-slope roof is torn off to the deck, the replacement roof often has to meet current insulation requirements in Michigan’s energy code. Requirements depend on the building type and the scope of work, so we confirm them with the local building department before pricing. Added insulation also means lower heating bills and less snowmelt-driven ice at the edges.
The Verified way
How your project works
- 1
Measured
We order a Hover or EagleView measurement report, so your price is based on real wall or roof area.
- 2
Inspected & photographed
We photograph the roof, siding, flashing and trim, and show you what we found.
- 3
Priced line by line
Your written quote names every brand, product and color, plus tear-off, underlayment and trim.
- 4
Installed to spec
Installed to the manufacturer’s instructions, then a cleanup and a final photo walkthrough.
Related services
Commercial
Flat roof replacement, metal roofing and wall panels, and siding for commercial buildings.
Multi-Family, Mixed-Use & HOA
Roof and siding replacement for apartments, mixed-use buildings, condos and HOA communities.
Storm Damage & Insurance
Hail and wind damage inspections, documentation and meeting your adjuster on site.
FAQ
Frequently asked questions
What is the best flat roof material in Michigan?
TPO and EPDM are both proven single-ply membranes for Michigan flat roofs. TPO is usually white and has heat-welded seams; EPDM is a rubber membrane with a long track record and good cold-weather flexibility. The best choice depends on the building, rooftop traffic and budget.
Can you put shingles on a flat roof?
No. Shingles need a steep enough slope to shed water. On roofs below about 2 inches of rise per foot, a continuous membrane such as TPO or EPDM is the right choice.
Why does water pond on my flat roof?
Usually because the roof has too little slope to its drains, the drains are clogged or undersized, or the deck has sagged. On a replacement we can add tapered insulation and crickets to move water off the roof.
Do you replace flat roofs on homes?
Yes. We replace flat and low-slope roofs on porches, additions, garages and modern homes, as well as on commercial and multi-family buildings.
Ready for a roof or siding you can verify?
Free Inspection & Quote · Fully licensed & insured · Financing available on residential projects
Free Inspection & Quote. You pay for your project, not ours.



