Free online roof estimate
Free online roof estimate: what will a new roof cost on your home?
Enter your home’s size, attached garage and roof pitch, then pick a material. The calculator estimates your roof area in squares and a typical installed price range for Michigan from published cost guides.
- Malarkey (Certified Pro Contractor) and CertainTeed shingles, standing seam or exposed-fastener metal
- Adjusts for roof pitch and attached garage
- Send your numbers and book a Free Inspection & Quote
Instant Roof Estimate
Enter your home’s size, then pick a shingle or metal roof and a color. You’ll get your estimated roof area, price and a preview of the color.
Color: (color doesn’t change the price)
Estimated roof area
–
Typical installed price range
–
Get my exact pricePlanning estimate only, not a quote. Shingle prices are our installed price per square; metal ranges are from RoofObservations, Michigan 2026. Your price depends on measured area, tear-off, sheathing or deck repair, trim and access. We measure every home with a Hover or EagleView report before pricing.
What the calculator assumes
The calculator divides your living area by your number of stories to estimate the footprint, adds the attached garage, then multiplies by a pitch factor (steeper roofs have more surface) and adds about 8% for overhangs. One roofing square is 100 sq ft.
Hip roofs, dormers, valleys and skylights add material and labor, so a complex roof can land above this range. We price from a measured report.
What changes your roof price
- Tear-off: removing one or more old layers and disposal
- Decking repair: replacing soft or rotted roof boards found after tear-off
- Pitch and height: steep or tall roofs need more safety setup and time
- Underlayment and ice and water shield at the eaves and in valleys
- Ventilation, flashing and chimneys: new ridge vents, step flashing and chimney flashing
- Skylights and penetrations that need new flashing kits
Typical installed cost by material
| Material | Typical installed cost | Source |
|---|---|---|
| Architectural asphalt shingles | About $4.50–$8.00 per sq ft (metro Detroit, 2026) | Roof Metro Detroit, 2026 |
| Standing seam steel | About $13.15–$16.35 per sq ft (Michigan) | RoofObservations, 2026 |
| Exposed-fastener steel panels | About $8.50–$10.60 per sq ft (Michigan) | RoofObservations, 2026 |
| Flat / low-slope (TPO, EPDM) | Priced from a roof survey | Free Inspection & Quote |
Monthly payment options are available through our financing partner.
Related services
Asphalt Shingle Roofing
Architectural shingles from Malarkey and CertainTeed, installed over a properly prepared deck.
Metal Roofing
Standing seam and exposed-fastener metal roofs for homes, barns, garages and commercial buildings.
Instant Siding Estimate
Estimate your wall area and a typical installed price range in under a minute.
FAQ
Frequently asked questions
Can I get a free roof estimate online?
Yes. This calculator gives you an instant online roof estimate from your home's size, garage, roof pitch and material. For an exact price, send your numbers and book a Free Inspection & Quote, and we'll measure your roof for a written quote.
Is this a quote?
No. It's a planning range from published cost guides. Your exact price comes from a measured report of your home and a written estimate that lists every product.
What is a roofing square?
A square is 100 square feet of roof surface. A typical 2,000 sq ft two-story home with an attached two-car garage has roughly 17 to 22 squares, depending on pitch.
How do you measure my roof?
We order a Hover or EagleView measurement report and inspect the roof, so your price reflects the real area, pitch, valleys and flashing.
Does insurance pay for a new roof?
If a covered storm damaged your roof, your policy may pay for repair or replacement. We can inspect and document the damage. See our storm damage page.
Get your exact roof price
Free Inspection & Quote · Fully licensed & insured · Financing available on residential projects



