Steep-slope roofing · Metal
Standing seam and exposed-fastener metal roofs
We install standing seam and exposed-fastener metal roofs on homes, barns, garages and commercial buildings across Macomb, Oakland, St. Clair, Sanilac, Tuscola and Lapeer counties. A metal roof costs more than asphalt up front. In return it sheds snow, stands up to wind and lasts far longer between replacements.
- Concealed-clip standing seam for homes; screw-down panels for outbuildings
- Snow guards planned over entries, walkways and lower roofs
- Panels from Metal Sales
- Concealed-clip standing seam for homes; screw-down panels for outbuildings
- Snow guards planned over entries, walkways and lower roofs
- Trim and flashing from Michigan-based Quality Edge
Brands we install

Standing seam vs exposed fastener
| Standing seam | Exposed fastener (screw-down) | |
|---|---|---|
| Attachment | Concealed clips under raised seams; panels move with temperature | Screws through the panel face |
| Look | Clean lines, no visible screws | Ribbed panel with visible screw rows |
| Maintenance | Low; inspect flashings and sealants | Screws and washers need checking over time |
| Typical use | Homes, visible commercial roofs | Barns, pole buildings, garages, industrial |
| Cost | Higher | Lower |
On a Michigan house, standing seam is usually the right metal roof, because concealed clips let the panels expand and contract through big temperature swings without working screw holes loose.
Why metal works in Michigan
- Snow and ice. Metal sheds snow readily, so we plan snow guards above entries, walkways, decks and lower roofs. Ice barrier still goes on at the eaves.
- Freeze-thaw. No granules to lose and no tabs to crack. The details that matter are flashings, penetrations and sealants.
- Wind. Standing seam installed to the manufacturer’s tested clip spacing holds up well in high winds.
- Condensation. Over a cold attic or an uninsulated building, the underlayment and ventilation plan matter. We design for it.
What a metal roof costs
Typical published ranges, not a Verified quote. A national cost guide lists installed standing seam steel at about $12.75–$15.90 per sq ft depending on the finish, and standing seam aluminum at about $17.00–$21.25 per sq ft (RoofObservations). What moves the price: roof complexity, pitch, tear-off, deck repair, panel gauge and finish, snow guards and the number of penetrations. We’ll price metal and shingles side by side if you’re deciding.
The Verified way
How your project works
- 1
Measured
We order a Hover or EagleView measurement report, so your price is based on real wall or roof area.
- 2
Inspected & photographed
We photograph the roof, siding, flashing and trim, and show you what we found.
- 3
Priced line by line
Your written quote names every brand, product and color, plus tear-off, underlayment and trim.
- 4
Installed to spec
Installed to the manufacturer’s instructions, then a cleanup and a final photo walkthrough.
Related services
Asphalt Shingle Roofing
Architectural shingles from Malarkey (Certified Pro Contractor) and CertainTeed, installed over a properly prepared deck.
Metal & Steel Siding
Vesta steel siding by Michigan-based Quality Edge, in woodgrain and smooth finishes.
Commercial
Flat roof replacement, metal roofing and wall panels, and siding for commercial buildings.
FAQ
Frequently asked questions
Is a metal roof worth it in Michigan?
Often, if you plan to stay. Metal costs more than asphalt up front but sheds snow, resists wind and lasts much longer between replacements. We price both so you can compare.
Is a metal roof noisy in the rain?
Over a solid deck with underlayment and an insulated attic, most homeowners don’t notice a big difference. Exposed-fastener panels over open framing on an outbuilding are louder.
Can metal be installed over my old shingles?
On homes we tear off to the deck so we can replace damaged sheathing and install the ice barrier needed at the eaves.
Do I need snow guards on a metal roof?
Usually, above doors, walkways, decks and lower roofs. Snow slides off metal in sheets, and snow guards hold it in place to melt.
Ready for a roof or siding you can verify?
Free Inspection & Quote · Fully licensed & insured · Financing available on residential projects
Free Inspection & Quote. You pay for your project, not ours.



