Low-slope roofing · TPO
TPO roofing with welded seams and a roof that drains
TPO (thermoplastic polyolefin) is a single-ply roofing membrane, usually white, with seams that are welded with hot air instead of glued. We install Versico and GenFlex TPO on commercial buildings, multi-family properties and flat residential roofs in Macomb, Oakland, St. Clair, Sanilac, Tuscola and Lapeer counties.
- Hot-air welded seams, probed and checked on every roof
- Mechanically attached or fully adhered, chosen for your deck and building
- Tapered insulation, crickets and edge metal designed with the membrane
Brands we install



Why owners choose TPO
- Welded seams. Seams are fused with hot air into a single sheet. Welded seams are typically the strongest part of a TPO roof.
- Reflective surface. White TPO reflects sunlight, which helps keep top-floor spaces cooler in summer.
- Rooftop equipment. TPO handles walkway pads, curbs and penetrations well, which suits buildings with HVAC units on the roof.
- Repairable. Clean TPO can be patched with heat-welded membrane years later.
How we install a TPO roof
- Tear-off and deck check. Wet insulation and damaged decking come out. We note every sheet we replace.
- Insulation. Polyiso insulation, often tapered to create slope to drains, fastened or adhered to the deck.
- Cover board where the roof will see foot traffic or needs added protection.
- Membrane. Mechanically attached in the seams or fully adhered, depending on the building and the manufacturer’s requirements.
- Welding and probing. Every seam is welded and probed.
- Details. Curbs, pipes, drains, walls and edges are flashed with manufacturer details. Edge metal and gutters finish the perimeter.
TPO vs EPDM vs PVC
| TPO | EPDM | PVC | |
|---|---|---|---|
| Material | Thermoplastic polyolefin | Synthetic rubber | Polyvinyl chloride |
| Seams | Hot-air welded | Taped | Hot-air welded |
| Usual color | White | Black | White |
| Chemical / grease resistance | Good | Fair | Very good (restaurants, exhaust) |
We’ll recommend the system that fits the roof. See EPDM roofing for comparison.
The Verified way
How your project works
- 1
Survey
We measure the roof, check drains, core the roof where needed and photograph problem areas.
- 2
Written scope
Membrane, thickness, insulation, attachment method and every detail are written on the proposal.
- 3
Installed to spec
Seams welded and probed, details flashed to the manufacturer’s instructions.
- 4
Closeout
Final walk with photos and documentation of the finished roof.
Related services
EPDM Roofing
Durable rubber membrane with a long track record on flat roofs. Flexible in cold weather.
Low-Slope & Flat Roofing
TPO and EPDM membrane roofs for commercial buildings, porches, additions and flat residential roofs.
Commercial
Flat roof replacement, metal roofing and wall panels, and siding for commercial buildings.
FAQ
Frequently asked questions
What is a TPO roof?
TPO is a thermoplastic polyolefin single-ply roofing membrane, usually white, used on flat and low-slope roofs. Its seams are welded together with hot air rather than glued.
Is TPO good for Michigan weather?
Yes, when it is installed with proper drainage and details. TPO’s welded seams and reflective surface work well on Michigan commercial and residential flat roofs. Drainage, flashings and edge details matter as much as the membrane itself.
What thickness of TPO should I use?
TPO commonly comes in 45, 60 or 80 mil. Thicker membranes add durability and are often specified for longer warranties or higher-traffic roofs. We recommend a thickness based on the building and your plans for it.
Can TPO go over my existing roof?
Sometimes, if the existing roof is dry and building codes allow another layer. Wet insulation must come out. We check moisture conditions before recommending a recover or a full tear-off.
Ready for a roof or siding you can verify?
Free Inspection & Quote · Fully licensed & insured · Financing available on residential projects
Free Inspection & Quote. You pay for your project, not ours.



